SHOPEE LINK
LAZADA LINK
LAZADA LINK
*Surface must be sound,clean ,dust free and dry
*Porous surface-dampen lightly with water before applying
*Non-porous surfaces-should be dry or only very slightly damp
*Apply Flashbnd Primer with a water dampened brush.Allow to dry,but protect from rain or frost.
*Fill crack wider than 3mm,deep hollows or depressions
*Cut Flashband to required length
*Remove the backing.Press flashband into place using fingertip pressure.Avoid excessive pressure.
*When laying adjacent rolls the flashband must overlap by lest 25mm
*Use a seam roller or rounded piece of wood to smooth ths.Flashband and ensure good contact is made
Inquiry - Waterproof Adhesive Roof Weather Instant Seal Tape
